| API Flanges |
| |
| Oilquip offer a large range of API 6A and ANSI forged swivel flanges, Blind flanges, slip-on flanges and weld-neck flanges in 4130 carbon steel, to suit 2” to 6” nominal bore XXS pipe with pressure rating below. The API 6A specification requires a rigorous and unique quality system including stringent dimensional and NDT control. The application of an API monogram is that you, the client will be guaranteed of total compliance with the API specifications |
| |
| API Studded Blocks |
| |
| Flanged studded crosses and tees are available from 2” through to 6” with pressure ratings of 5,000 psi and 10,000 psi in AISI 4130 material. |
| |
| Hub & Clamp Connector |
| |
| The Oilquip connector is a compact mechanical joint consisting of four basic elements:- hubs, seal ring, clamps and bolting. During assembly the hubs are pulled together under the twin wedge action of the clamp segments, the sealing action is improved due to internal pressure. Each connector requires only four bolts, which includes a 100% safety/redundancy factor. The ability of the clamp connector to withstand severe bending without leakage or periodic re-tightening, has been recognised for many years in the Offshore Industry. All materials are AISI 4130- carbon steel and meet the requirements of NACE with the following pressure ratings. The particular advantage of the connector is its ability to be disconnected quickly and avoid ‘hot work’ on site. |
|
|
|
|
